• Atlas Sound DPA804 Amplifier – 400 W RMS – 4 Channel

    Key FeaturesManufacturer Part Number: DPA804Minimum Frequency Response: 20 HzMaximum Frequency Response: 20 kHzTotal Harmonic Distortion (THD): 1%Impedance: 4 OhmClassification: ABAudio Channels: 4RMS Output Power: 400 WEthernet: YesWireless LAN: NoBluetooth: NoUSB: NoOperating Power Consumption: 794 WHeight: 1.8″Width: 19″Depth: 15.5″Weight (Approximate): 13 lbPackage Contents: DPA804 Multi-Channel Network Amplifier Power Cord Environmentally Friendly: YesEnvironmental Certification: T?VRoHSWEEELimited Warranty: 3 YearPackage Contents DPA804 Multi-Channel Network Amplifier Power Cord OverviewThe AtlasIED DPA804 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA804 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements. The DPA804 can be used right out of the box in its factory default configuration as a traditional four-channel 70.7V commercial power amplifier requiring no programming, special set-up, or network connectivity. However, the DPA804 can be configured in four-channel mode with either 4? or 8? load impedances for two stereo zones. Many system designs require both low and high impedance amplification. The DPA804 can be configured for a 70.7V/100V paging/background system on two channels and the other two channels can be used for 4?/8? foreground stereo applications. The DPA804 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 four-channel Dante trade; receiver card or a DPA-AMIX (2) mic/line and (2) AUX input card, for a total of eight inputs. All inputs can be mixed and routed to any of the four amplifier channels. All amplifier channels have an assortment of DSP tools including level controls, EQs, limiters, high low pass filters, and delay to provide flexibility for a range of applications. The output level can be assigned to either the front panel potentiometers or to the onboard GUI. Wired remote level controls can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet, or mobile device using a web browser. All settings can be password protected.

    $1,158.73
  • Atlas Sound DPA1202 Amplifier – 1200 W RMS – 4 Channel

    Key FeaturesManufacturer Part Number: DPA1202Minimum Frequency Response: 20 HzMaximum Frequency Response: 20 kHzTotal Harmonic Distortion (THD): 1%Impedance: 4 OhmClassification: ABAudio Channels: 4RMS Output Power: 1200 WEthernet: YesOperating Power Consumption: 1713 WHeight: 1.8″Width: 19″Depth: 14.5″Weight (Approximate): 13 lbPackage Contents: DPA1202 Multi-Channel Network Amplifier 8 x 18-10 AWG Wires Energy Star: YesEnvironmentally Friendly: YesEnvironmental Certification: T?VLimited Warranty: 3 YearPackage Contents DPA1202 Multi-Channel Network Amplifier 8 x 18-10 AWG Wires OverviewThe AtlasIED DPA1202 features a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound. The network based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation. The unit is factory preconfigured in a two-channel 70V mode. If the design requires four channels of low impedance amplification, the amplifier can be configured as 4-channel model with either 4? or 8? load impedances. Many system designs require both low and high impedance amplification. This unit can be configured to deliver 70V/100V for a paging/background system on a single channel plus two additional 4?/8? amplifier channels for foreground stereo applications. The DPA1202 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 4-channel Dante trade; receiver card or a DPA-AMIX (2) mic / line, (2) AUX input card, giving the DPA1202 a total of 8 inputs. All inputs can be mixed and routed to any of the four amplifier channels. All four amplifier channels have an assortment of DSP tools including level controls, EQ’s, limiters, high low pass filters, and delay to provide flexibility for a range of applications. The output level can be assigned to either the front panel potentiometers or to the on board GUI. Wired remote level control can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet or mobile device using a web browser. All settings can be password protected. The unit also includes a PC based site manager software that automatically searches within a specific network for all DPA amplifiers on the network. It will list them and allow a single click access to any unit. The DPA Site Manager software can do a variety of functions besides locating IP addresses such as; fault reporting, input output status, standby status and remote activation via a scheduler timer. The flexibility of the DPA Series amplifiers and comprehensive assortment of local or network control configurations make them an ideal choice in today’s sophisticated commercial audio market.

    $973.96

Main Menu