• Altronix PACE16PRM Sixteen (16) port IP and PoE+ Over Extended Distance CAT5e Receiver

    Key FeaturesManufacturer Part Number: PACE16PRMNetwork (RJ-45): YesHeight: 1.6″Width: 19.1″Depth: 8.5″Receiver Weight (Approximate): 7.20 lbEnvironmentally Friendly: YesEnvironmental Certification: RoHSLimited Warranty: LifetimeOverviewPace16PRM is a long range Ethernet receiver that transmits data at 100mbps full duplex and power via CAT5e or higher cable in a PoE(+) compliant format. The Pace16PRM receiver is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at the distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over structured cable. Applications: Extend Network link distance in an industrial environment. Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.

    $1,867.84
  • Altronix EBRIDGE8E Eight (8) Port Managed EoC Receiver with Integral PoE+ Switch (25Mbps)

    Key FeaturesManufacturer Part Number: EBRIDGE8EColor: Green – LEDYellow – LEDBlue – LEDHeight: 0.6″Width: 19.1″Depth: 8.5″Weight (Approximate): 6 lbApplication/Usage: CameraCompatibility: Altronix Ethernet over Coax Transceiver: eBridge1PCTX eBridge1ST Country of Origin: United StatesLimited Warranty: LifetimeOverviewThe eBridge8E is an all-in-one head-end solution for upgrading coax to IP that combines a PoE+ switch and EoC Receiver into a single integrated unit for upgrading existing coax infrastructure and deploying the latest IP devices. This 8-Port Managed EoC Receiver with Integral PoE+ switch provides 30W full power per port (240W max). Features also include an integral battery charger for applications requiring backup and embedded LINQ Technology to monitor, control and report power and diagnostics from anywhere. Applications: Eliminates the costs and labor associated with installing new network cabling. Retrofit digital IP cameras in an analog CCTV installation. Works with Megapixel, HD720, HD1080 VGA (SD) cameras (see note, pg. 2). Extend Network link distance in an industrial environment. Upgrade deployed CCTV Coax to a digital network for Retail, Casinos, Airports, Schools, Hospitals, etc.

    $1,012.97
  • Altronix EBRIDGE800PCRM Eight (8) Port IP and PoE+ Over Coax Receiver

    Key FeaturesManufacturer Part Number: EBRIDGE800PCRMHeight: 1.6″Width: 19.1″Depth: 8.5″Weight (Approximate): 5.80 lbApplication/Usage: Video Surveillance SystemEnvironmentally Friendly: YesEnvironmental Certification: RoHSLimited Warranty: LifetimeOverviewThe eBridge800PCRM and eBridge100TM are CAT5e to Coax cable Ethernet adapters/Media converters that deliver data and power over the coax cable in a PoE+ compliant format. The paired set enables fast 100Base-T Full Duplex Ethernet digital communication to be transmitted over Coax cable. The eBridge800PCRM eight (8) port receiver is powered by any UL Listed PoE midspan or endspan product, such as a NetWay8M or NetWay16M, and pass its power over the coax to the eBridge100TM. This enables the eBridge800PCRM to be used in a managed manner, allowing for remote camera reset. The eBridge100TM in turn passes PoE+ compliant power to a PoE enabled camera or IP device. These plug and play units facilitate system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission and power over the Coax is possible up to 300m in comparison to 100m Ethernet maximum distance. A maximum range from head end to the PoE camera/device is 500m taking into consideration that up to 100m of structured cable may be deployed at each end. Applications: Retrofit digital IP cameras in an analog CCTV installation. Works with Megapixel, HD720, HD1080 and VGA (SD) cameras. Extend Network link distance in an industrial environment. Upgrade deployed CCTV Coax to a digital network in Retail, Hospitality, Arenas, Casinos, Airports, Schools, Hospitals, Transportation, etc.

    $947.52
  • Altronix PACE8PRM Eight (8) port IP and PoE+ Over Extended Distance CAT5e Receiver

    Key FeaturesManufacturer Part Number: PACE8PRMNetwork (RJ-45): YesHeight: 1.6″Width: 19.1″Depth: 8.5″Receiver Weight (Approximate): 5.80 lbEnvironmentally Friendly: YesEnvironmental Certification: RoHSLimited Warranty: LifetimeOverviewPace8PRM is a long range Ethernet receiver that transmits data at 100mbps full duplex and power via CAT5e or higher cable in a PoE(+) compliant format. The Pace8PRM receiver is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at the distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over structured cable. Applications: Extend Network link distance in an industrial environment. Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.

    $933.92
  • Altronix NETWAYSP8WP 8PT FIB MED CONV/2SFP/PS/NEMA4

    Key FeaturesManufacturer Part Number: NETWAYSP8WPInput Voltage: 120 V AC230 V ACMaximum Output Power: 115 WWeight (Approximate): 11.90 lbLimited Warranty: LifetimeOverview8-port Ethernet over Fiber Hardened PoE+ Switch features four (4) PoE/PoE+ ports (150W max.) at 10/100/1000Mbps, Two (2) 1Gb SFP uplink for IP over fiber applications. Embedded LINQ Technology lets you control power, monitor and report diagnostics. Built-in battery charger. NEMA 4/4X, IP66-11 outdoor encl. 13.31″H x 11.31″W x 5.59″D. 115/230VAC Input.

    $798.34
  • Altronix NETWAY16G 16Port Managed POE+ MIDSPN 480W

    Key FeaturesManufacturer Part Number: NETWAY16GInput Voltage: 120 V AC230 V ACMaximum Output Power: 480 WRack Height: 1UMount Type: Rack-mountableHeight: 5.5″Width: 12.5″Length: 20.3″Weight (Approximate): 5.10 lbLimited Warranty: LifetimeOverview16 Port Managed Midspan provides 30W full power per port (480W max.) at 10/100/1000Mbps. Embedded LINQ Technology lets you control power outputs, monitor and report diagnostics. Built-in battery charger. 1U EIA 19″ Rack Mount Chassis. 115/230VAC Input.

    $705.85
  • Altronix MAXIMAL77D Power Module

    Key FeaturesManufacturer Part Number: MAXIMAL77DInput Voltage: 110 V ACHeight: 26″Width: 19″Depth: 6.3″Weight (Approximate): 41 lbEnvironmentally Friendly: YesEnvironmental Certification: RoHSCountry of Origin: United StatesLimited Warranty: LifetimeOverviewThis unit distributes and switches power to access control systems and accessories. It converts a 115VAC 60Hz input into sixteen (16) independently controlled 24VDC PTC protected outputs. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.

    $552.85
  • Altronix MAXIMAL33 Proprietary Power Supply

    Key FeaturesManufacturer Part Number: MAXIMAL33Input Voltage: 110 V ACNumber of +12V Rails: 16Output Voltage: 12 V DC @ 5.50 A24 V DC @ 5.70 AForm Factor: Wall MountHeight: 26″Width: 19″Depth: 6.3″Weight (Approximate): 40.10 lbCompatibility: Signal EquipmentAccess Control Systems:Mag LocksElectric StrikesMagnetic Door HoldersEnvironmentally Friendly: YesEnvironmental Certification: RoHSLimited Warranty: LifetimeOverviewThis unit distributes and switches power to access control systems and accessories. It converts a 115VAC 60Hz input into sixteen (16) independently controlled 12VDC and/or 24VDC fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.

    $505.78
  • Altronix NETWAY16M NetWay NetWay16M Power over Ethernet Injector Hub

    Key FeaturesManufacturer Part Number: NETWAY16MInput Voltage: 110 V ACMaximum Output Voltage: 55 VMaximum Output Power: 300 WOutput Ports: 16 EthernetHeight: 1.6″Width: 19.1″Depth: 8.5″Weight (Approximate): 10.20 lbPackage Contents: NetWay NetWay16M Power over Ethernet Injector Hub2 x Mounting Brackets6 x Flat Head Screws (For Mounting Brackets)4 x Rubber PadsCompatibility: Fixed CamerasPTZ IP CamerasCertifications Standards: ULCULCEIEEE 802.3af compliantIEEE 802.3at compliantEnvironmentally Friendly: YesEnvironmental Certification: RoHSLimited Warranty: LifetimePackage ContentsNetWay NetWay16M Power over Ethernet Injector Hub2 x Mounting Brackets6 x Flat Head Screws (For Mounting Brackets)4 x Rubber PadsOverviewThe NetWay16M Managed Midspans provide power and pass data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m (328 ft.) from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m (328 ft.) for a total range of up to 200m (656 ft.). A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement. NetWay Managed Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 adapters.

    $502.45
  • Altronix VERTILINE16DI VERTILINE16Di Proprietary Power Supply

    Key FeaturesManufacturer Part Number: VERTILINE16DIInput Voltage: 110 V AC220 V ACOutput Voltage: 24 V AC @ 16 A28 V AC @ 16 AForm Factor: Rack-mountableHeight: 1.6″Width: 19.1″Depth: 8.5″Weight (Approximate): 13.45 lbPackage Contents: VERTILINE16Di Proprietary Power SupplySpare FusesCompatibility: CCTV SystemsEnvironmentally Friendly: YesEnvironmental Certification: RoHSCountry of Origin: United StatesLimited Warranty: LifetimePackage ContentsVERTILINE16Di Proprietary Power SupplySpare FusesOverviewAltronix Vertiline CCTV Isolated Rack Mount Power Supplies provide 16 power outputs in a space saving 1U EIA 19″ rack mount chassis which may be rack, wall or shelf mounted. The units feature individually selectable 24VAC and/or 28VAC power outputs with surge suppression. Vertiline CCTV Isolated Rack Mount Power Supplies are also available in eight (8) output models.

    $494.84
  • Altronix MAXIMAL33RD Power Module

    Key FeaturesManufacturer Part Number: MAXIMAL33RDReceptacles: 16 x Terminal BlockInput Voltage: 110 V ACHeight: 3.3″Width: 19.1″Depth: 8.5″Weight (Approximate): 14.30 lbEnvironmentally Friendly: YesEnvironmental Certification: RoHSCountry of Origin: United StatesLimited Warranty: LifetimeOverviewMaxim33RD units distribute and switch power to access control systems and accessories. They convert a 115VAC 50/60Hz input into sixteen (16) independently controlled 12VDC and/or 24VDC PTC protected outputs. Outputs are activated by an normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the outputs.

    $477.88
  • Altronix MAXIMAL33R Maximal33R Rack Mount Access Power Controller

    Key FeaturesManufacturer Part Number: MAXIMAL33RInput Voltage: 120 V ACNumber of +12V Rails: 8Output Voltage: 12 V DC @ 6 A12 V DC @ 12 A24 V DC @ 6 A24 V DC @ 12 AForm Factor: Rack-mountableHeight: 3.3″Width: 19.1″Depth: 8.5″Weight (Approximate): 12.40 lbCompatibility: Access Control Hardware Devices: Mag Locks Electric Strikes Magnetic Door Holders Environmentally Friendly: YesEnvironmental Certification: RoHSCountry of Origin: United StatesLimited Warranty: LifetimeOverviewMaximal33R rack mount access power controller distributes and switches power to access control systems and accessories. It converts a 115VAC 50/60Hz input into sixteen (16) independently controlled 12VDC and/or 24VDC fuse protected outputs. Outputs are activated by an normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the outputs.

    $477.88

Main Menu